DUMP TRAILER Electrical power UNIT

DUMP TRAILER Electrical power UNIT-DOUBLE ACTING
Basic Description
This power unit features a electrical power up power down circuit with load holding on the two A & B ports. A pressure compensatred movement management could be added to circuit to control the decent velocity in the cylinder.
Unique Notes
one. This power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean every one of the hydraulic parts concerned in advance of installation of the energy unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst, which should also be clean and no cost of impurities. N46 hydraulic oil is advisable.
four. The power unit must be mounted horizontally.
five. Check the oil degree while in the tank following the preliminary operating in the energy unit.
6. Oil changing is required immediately after the initial 100 operation hours, afterwards as soon as each and every 3000 hours.

DUMP TRAILER Electrical power UNIT- SINGLE ACTING
General Description
This electrical power unit features a power up gravity down circuit. Begin the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve could be offered if expected. Also a pressure compen sated flow control is usually additional to your circuit to manage the descent pace of the cylinder.
Remark: Please seek advice from our sales engineer for the unique pump displacement, motor power or tank capacity.
Unique Notes
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean the many hydraulic parts concerned ahead of set up of the power unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst,which really should also be clean and no cost of impurities.N46 hydraulic oil is advised.
4. The electrical power unit need to be mounted horizontally.
5. Check the oil degree during the tank after the original operating with the electrical power unit.
six. Oil shifting is required right after the first 100 operation hours, afterwards as soon as every single 3000 hrs.

Tags:

As one of leading tractor pto shaft manufacturers, suppliers and exporters of mechanical products, We offer tractor pto shaft and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of tractor pto shaft

Recent Posts