Material Dealing with Power UNIT 2
This energy unit characteristics energy up gravity down circuit. Activate the get started solenoid to start out the motor to lift the machine. The lowing movement is activated from the solenoid valve with the decreasing velocity controlled from the strain compensated flow management valve. Products of this series might be extensively used in the industry of logistic units such as fork lift, mini lift table, etc.
1. The duty of this electrical power unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean the many hydraulic elements concerned just before mounting the energy unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst,which need to also be clean and cost-free of impurities, N46 hydraulic oil is encouraged .
four. Oil transforming is needed following the first one hundred operation hours,afterwards after every single 3000 hours.
five. The electrical power unit should be mounted horizontally.
Material Managing Electrical power UNIT 1
This electrical power unit is designed for your fork lift field, consisting of extremely productive gear pump, DC motor, manual increase and lower valve, tank, ect. The up and down motion are managed through the lever of the guide release valve, that is outfitted with an electric switch to activate the motor. The lowing speed is controlled from the strain compensated flow control valve.
1. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean all of the hydraulic parts concerned before installation of the energy unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst, which should really also be clean and no cost of impurities, N46 hydraulic oil is proposed .
4. Oil shifting is needed just after the preliminary a hundred operation hrs, afterwards once just about every 3000 hrs.
five. The power unit proven is created to be mounted horizontally.