This electrical power unit capabilities a long lasting magnet motor which has a electrical power up gravity down circuit. Activate the start off solenoid to start out the motor to lift the machine. The lowing movement is activated through the solenoid valve with all the reducing speed managed by the stress compensated movement manage valve. Merchandise of this series could be extensively utilized in the marketplace of logistic units this kind of as fork lift, mini lift table, and so forth.
1. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean all of the hydraulic elements concerned just before set up of the power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst, which need to also be clean and cost-free of impurities. N46 hydraulic oil is recommended.
4. This electrical power unit is designed to be mounted vertically.
five. Check the oil level within the tank immediately after the 1st star of your electrical power unit.
6. Oil shifting is needed immediately after the preliminary one hundred operation hrs,afterwards the moment just about every 3000 hours.
seven. More pump sizes and tank sizes are avaiable upon request.